wall anchor system

 

Wall Anchor System

 

Stabilize Your Foundation Without Destabilizing Your Bank Account

Cracked and bowing wall

When it comes to cracking, bowed or buckling walls, many homeowners are surprised to learn that rebuilding the entire wall isn’t necessary and won’t solve their problem. The Wall Anchor System, using technology developed by engineers, can be used to secure and deteriorating walls. The first wall anchor system to be patented, Wall Anchor System restores the structural integrity of walls without having to rebuild them -- saving you time and money.

Foundation Wall Repair that Doesn’t Leave Your Home and Lawn in Disrepair

Inserting a steel anchor rod through the wall

 

Vertical hole in the ground

Steel wall plate is secured

 

While rebuilding a foundation wall involves jacking up the house, excavating around the wall and building a new wall, the Wall Anchor System uses anchoring plates and rods to stabilize the wall and counteract pressure being exerted against the wall -- without the cost and expense of rebuilding the entire wall.
 

Technicians install this system by inserting a steel anchor rod through the wall into the outside earth. A steel anchor is then attached to the rod through a vertical hole in the ground. Finally, a steel wall plate secures the rod to the inside basement wall.
 

Anchors can be placed in different locations along the wall and rod extenders can be used to avoid decks, flowerbeds, and other landscaping. The entire process usually takes less than one day and since we do not rebuild the entire wall, your home and lawn are left in almost the same condition as when technicians arrived.
 

The Time to Act is Now
 

Your home is one of the biggest investments you’ll ever make.  Don’t risk this investment by failing to take care of a cracked or bowing wall. Whether the cracking or bowing is caused by hydrostatic pressure, expansive soil -- or some other problems -- it’s a problem that needs to be fixed by experts in foundation repair.  By contacting Davenport Foundation Repair today for a free inspection and estimate, you’ll be saving yourself a lot of time and expense in the future.

Eight Steps to Secure a Foundation

Distances are measured
Holes are excavated.
Steel anchor is installed.
Hole is filled and sod is replaced.

1. Distances are measured.

2. Sod is carefully removed and saved.

3. Holes are excavated.

4. Initial hole is drilled in basement wall.

5. Steel anchor is installed.

6. Outside earth anchor is attached.

7. Steel wall plate is installed and tightened.

8. Hole is filled and sod is replaced.

Sod is carefully removed and saved.
Initial hole is drilled in basement wall
Outside earth anchor is attached.

866-9-LIFT UP [866-954-3887]

 

[Home] [Contact Us] [About Us][Helix Pier System] [Foundation Pier System] [Wall Anchor System] [FAQ]



Copyright © 2004 - 2005 Davenport Foundation Repair. All Rights Reserved. Site and all contents are the sole property of Davenport Foundation Repair, Utah USA. No part of this site may be copied or used without the express written permission of the owner.