Proudly Serving Salt Lake City, West Valley City, Provo & Nearby
Click on a photo to enlarge.
This set shows that by using polylevel for lifting concrete pads, it helps reduce trip hazards that are prevalent when concrete sinks. Sandy Utah and the surrounding areas are prone to concrete cracks and sinking that can be repaired easily.
This Sandy, UT home had a sunken driveway panel that created a noticeable lip and trip hazard at the control joints. Settlement from Utah’s freeze–thaw cycles, gutter runoff, and soil washout caused the slab to drop and redirect water toward the garage. Our crew used polyurethane foam injection (PolyLevel®) to lift the concrete back to the correct grade, stabilize the base soils, and restore proper drainage. After the lift, we sealed the joints to help keep water out and protect the repair.
The result is a level, safer driveway with improved curb appeal—completed in about a day with minimal disruption. If you’re seeing uneven concrete, gaps at joints, or water pooling around your driveway in Sandy or the greater Salt Lake Valley, concrete lifting and leveling is a fast, long-lasting solution.
This Midvale, UT homeowner called about her uneven driveway. It was a tripping hazard, and an eye-sore to look at! Davenport Foundation Repair went to fix the sunken concrete.
We suggested PolyLevel, a foam injection that goes beneath the concrete and expands to raise it to its original position. Using our amazing PolyLevel Injection Foam, we were able to lift two slabs of concrete back to level, creating a safe area for our customer.
We installed 14 push piers at this structure in Midvale, Utah. There was a severe separation between some of the walls around the structure. The wall and roofline also had a separation. Our crew worked three days pushing piers up to 20 feet into the soils below to achieve stability.
Severe foundation settlement caused large stair step cracks in this commercial building located in Midvale, Utah. There was severe wall and roof separation. We installed 14 piers on the interior of the building to lift and stabilize a sinking foundation. Our crew excavated the foundation footer and partially removed it to install the pier in the proper position. Once the piers were in place, the building was lifted back to stability and gaps in the brick of the stair step cracks closed.